This is a rolling record of power figures for various hardware I encounter.
| device | workload | supply | watts |
|---|---|---|---|
| W-1290 + 2 m.2 | debian 12 idle | 80+ bronze | 20 |
| W-1290 + 2 m.2 | 1080p yt | 80+ bronze | 30-32 |
| W-1290 + 2 m.2 | 1080p60 yt | 80+ bronze | 32-35 |
| Ryzen 5600x + 2 sata ssd + WX2100 | 1080p60 yt | 80+ gold | 60 |
| Ryzen 5600x + 2 sata ssd + WX2100 | debian 11 idle | 80+ gold | 29 |
| Ryzen 5600x + 2 sata ssd + WX2100 | stress-ng | 80+ gold | 113 |
| E3-1270v3 + 5400rpm 2.5 | xubuntu idle | 80+ gold | 18 |
| E3-1270v3 + 5400rpm 2.5 | stress-ng | 80+ gold | 90-93 |
| E3-1270v3 + 2 sata ssd | k8s/ceph | 80+ gold | 20-26 |
| Ryzen 5600x + 2 sata ssd + 1 m.2 | k8s/ceph | 80+ gold | 30-35 |
| Ryzen 5600x + 5400rpm 2.5 | debian 11 idle | 80+ gold | 22 |
| Ryzen 5600x + 5400rpm 2.5 | debian 12 idle | 80+ gold | 22 |
| Ryzen 5600x + sata ssd | debian 12 idle | 80+ gold | 19.7 |
| Atom D525 + 1 2.5 hdd | debian 11 idle | non-80 | 23 |
| Atom D525 + 1 2.5 hdd + Silicom peg6 | k8s/ceph | non-80 | 35-40 |
| Pentium 4 + 2 7200rpm 3.5 | debian 12 idle | non-80 | 76 |
| Pentium 4 + 2 7200rpm 3.5 | stress-ng | non-80 | 120 |
| Supermicro A2SAV-L E3940 | xubuntu idle | 80+ bronze | 12 |
| HP Procurve 1800-24G | idle | 16.5 | |
| HP Procurve 1800-24G | 2 ports active | 17.5 | |
| WRT54G | idle | 5.6 | |
| WRT54G | wifi load | 6 | |
| A1SAi-2750F | chassis power off, ipmi on | 80+ gold | 3.8 |
| A1SAi-2750F | debian live usb idle no drives | 80+ gold | 14.5 |
| A1SAi-2750F | no drives; stress-ng –vm 8 | 80+ gold | 23.2 |
| A1SAi-2750F | no drives; silicom peg6 idle | 80+ gold | 22-23 |
| Lanner 1515b | powered off | Lanner brick | 5.1 |
| Lanner 1515b | debian 12 idle, bios defaults | lanner brick | 13.5 |
| Lanner 1515b | debian 12 idle, speedstep enabled | lanner brick | 13 |
| Lanner 1515b | 2 ethernet idle | lanner brick | 13.6 |
| Lanner 1515b | mitm iperf -d enp2s0f2->enp2s0f3 | lanner brick | 14.3 |
| Lanner 1515b | mitm iperf -d enp6s0f0->enp6s0f1 | lanner brick | 14.1 |
| Lanner 1515b | mitm iperf -d enp8s0f0->enp8s0f1 | lanner brick | 14.1 |
| Lanner 1515b | mitm iperf -d enp2s0f2->enp8s0f1 | lanner brick | 14.2 |
| Datto c2758 | debian 12 idle, no cards | fsp brick | 8.9 |
| Datto c2758 | 3 ports active bgp | fsp brick | 11.2 |
| Datto c2758 | 2 ethernet idle | fsp brick | 9.5 |
| Datto c2758 | mitm iperf -d enp3s0->enp4s0 | fsp brick | 11.5 |
| Datto c2758 | mitm iperf -d enp3s0->enp0s20f3 | fsp brick | 11.8 |
| Trendnet TEG-S16g | idle | 2.5 | |
| Trendnet TEG-S16g | 2 ports idle | 2.8 | |
| Trendnet TEG-S16g | 2 ports iperf | 3 | |
| Cisco WS-C2960X-24TS-LL | all ports idle | 21 | |
| Arista DCS-7048T-A | all ports idle | one psu | 134 |
| Lenovo m75q 3400ge + 2 dimms + no wifi | k8s idle | 90w | 10.4 |
| Lenovo m75q 3400ge | stress-ng –vm 8 –vm-bytes 8g | 90w | 63 |
